[Anthill-pro] Re: How to configure builder in Jobconfiguration i.e build.xml & Target

[Eric Minick]

Sounds good, all you need to do is add Anthill steps that do the builds 
using the same commands the CM person uses. Once produced, you need to 
add an artifact deliver publisher that will grab the produced files.Once 
that is in place, you can add another job and workflow for deployments. 
That will need to run on your target servers and will use a 'resolve my 
artifacts' step to pull down the files that were published.

A step-by-step for an Oracle server is tough to just throw over the wall 
to you since the processes tend to differ a lot depending on how your 
team works and how your application is structured. It's best to start by 
automating your existing process.

Regards,

Eric

Shalu G wrote:

>
> Ryan,
>            We are doing some testing on behalf of xerox corporation.
>
> To deploy front end .Net applications, our configuration Management (CM)
> person extracts the code files from subversion at particular versions 
> specified
> by the developers and based on the application type, the code files are
> build using the respective build commands of the applications and the
> binaries/code/resource files are copied to the targeted folders on the
> servers. And the CM will update any configuration files on the server,
> based on the developer instructions.
>
>
> Regards
> Shalu Gupta
> Tata Consultancy Services
> Mailto: shalu.g at tcs.com
> Website: http://www.tcs.com
>
>
> *Ryan Smith <rws at urbancode.com>*
>
> 06/04/2007 05:45 PM
> Please respond to
> rws at urbancode.com
>
>
> 	
> To
> 	Shalu G <shalu.g at tcs.com>
> cc
> 	anthill-pro at lists.urbancode.com, support at urbancode.com
> Subject
> 	Re: How to configure builder in Jobconfiguration i.e build.xml & Target
>
>
>
> 	
>
>
>
>
>
> Shalu,
>
> With Anthill you are not limited to just Ant scripts to build your
> software. If you are using .NET, we also support Nant. We also have a
> command-line builder so you can execute what you need to on the
> command-line. We also have customers invoking Visual Studio in headless
> mode to do builds. How do you build the project you are trying to set up
> in your developer environments?
>
> Ryan Smith
>
> Shalu G wrote:
> >
> > Hi Ryan,
> >               I am working in .net domain and i have not much idea how
> > to write or generate ant script file . Can u please send me a sample
> > ant file and little explanation of it .
> >
> >
> > Regards
> > Shalu Gupta
> > Tata Consultancy Services
> > Mailto: shalu.g at tcs.com
> > Website: http://www.tcs.com
> >
> >
> > *Ryan Smith <rws at urbancode.com>*
> >
> > 06/01/2007 06:33 PM
> > Please respond to
> > rws at urbancode.com
> >
> >
> >                  
> > To
> >                  Shalu G <shalu.g at tcs.com>
> > cc
> >                  anthill-pro at lists.urbancode.com, support at urbancode.com
> > Subject
> >                  Re: How to configure builder in Jobconfiguration 
> i.e build.xml & Target
> >
> >
> >
> >                  
> >
> >
> >
> >
> >
> > Shalu,
> >
> > The Ant script that is being executed is failing for some reason. On the
> > screen you forwarded, there is a output link next to the failed step. It
> > contains the output of the Ant script execution and most likely the
> > cause of the failure. Please check that out and send the contents of it
> > in if its not obvious what the problem is.
> >
> > Ryan Smith
> >
> > Shalu G wrote:
> > >
> > > I have created a build using anthillpro3 .. The build is getting
> > > failed and displaying error "PostProcessingScript Failing command:
> > > ExitCode 1 was not in {0}" .
> > >
> > > The are no publisher in the the Job ..Only builder is configured 
> .. The
> > > ant build is getting failed . kindly help me in setting builder so
> > > that the build is successful.
> > >
> > >
> > >
> > > Regards
> > > Shalu Gupta
> > > Tata Consultancy Services
> > > Mailto: shalu.g at tcs.com
> > > Website: http://www.tcs.com
> > > =====-----=====-----=====
> > > Notice: The information contained in this e-mail
> > > message and/or attachments to it may contain
> > > confidential or privileged information. If you are
> > > not the intended recipient, any dissemination, use,
> > > review, distribution, printing or copying of the
> > > information contained in this e-mail message
> > > and/or attachments to it are strictly prohibited. If
> > > you have received this communication in error,
> > > please notify us by reply e-mail or telephone and
> > > immediately and permanently delete the message
> > > and any attachments. Thank you
> > >
> > >
> > >  
> >
> > --
> > ===========================================================
> > Ryan Smith.                                             2044 Euclid
> > Ave., Suite 600
> > Lead Developer                  Cleveland, Ohio 44115
> > Urbancode, Inc.
> >                                email:  rws at urbancode.com
> > web:     www.urbancode.com      phone:  216-858-9000
> > web:     www.anthillpro.com     fax:    216-858-9602
> > ===========================================================
> >
> > ForwardSourceID:NT00004A56    
> > =====-----=====-----=====
> > Notice: The information contained in this e-mail
> > message and/or attachments to it may contain
> > confidential or privileged information. If you are
> > not the intended recipient, any dissemination, use,
> > review, distribution, printing or copying of the
> > information contained in this e-mail message
> > and/or attachments to it are strictly prohibited. If
> > you have received this communication in error,
> > please notify us by reply e-mail or telephone and
> > immediately and permanently delete the message
> > and any attachments. Thank you
> >
> >
> >  
>
> -- 
> ===========================================================
> Ryan Smith.                                             2044 Euclid 
> Ave., Suite 600
> Lead Developer                  Cleveland, Ohio 44115
> Urbancode, Inc.
>                                email:  rws at urbancode.com
> web:     www.urbancode.com      phone:  216-858-9000
> web:     www.anthillpro.com     fax:    216-858-9602
> ===========================================================
>
> ForwardSourceID:NT00004AC2    
>
>=====-----=====-----=====
>Notice: The information contained in this e-mail
>message and/or attachments to it may contain 
>confidential or privileged information. If you are 
>not the intended recipient, any dissemination, use, 
>review, distribution, printing or copying of the 
>information contained in this e-mail message 
>and/or attachments to it are strictly prohibited. If 
>you have received this communication in error, 
>please notify us by reply e-mail or telephone and 
>immediately and permanently delete the message 
>and any attachments. Thank you
>
>
>  
>