[Anthill-pro] AntHill agents

[Steve Boone]

Uldis,

Do you have an angent filter script set for either of these agents?  If so,
can we take a look at it.

Cheers,
Steve Boone

On 11/28/07, Uldis Karlovs-Karlovskis <uldisk at ctco.lv> wrote:
>
> Ok at this time I see errors in one of my agents that there is Broken Pipe
> errors (I hope this is fixed on 3.4) but anyway in the past I have noticed
> that if I run 4 builds on 2 agents simultaneous then there is no guarantee
> that there will be two builds per agent. Usually then one agent is filled
> up
> with builds which it can accept and then second agent is invoked.
>
> Uldis Karlovs-Karlovskis, C. T. Co
> uldis.karlovs-karlovskis at ctco.lv
>
>
> -----Original Message-----
> From: anthill-pro-bounces at lists.urbancode.com
> [mailto:anthill-pro-bounces at lists.urbancode.com] On Behalf Of Uldis
> Karlovs-Karlovskis
> Sent: trešdiena, 2007. gada 28. novembrī 9:05
> To: 'AnthillPro user and support list.'
> Subject: [Anthill-pro] AntHill agents
>
> Hello every body!
>
> I have a question what alghorhytm is used to choose which agent to invoke
> for building?
> I have two agents which have Throughput Metric=7. This is a highest number
> for my agents. I have builds which can take up to 40 hours so it is very
> important to split my big builds per agents depending on how much builds
> they are running at the moment. I have even configured that every big
> builds
> is fired 5 minutes after last big build but this don`t help. Now I see
> that
> my 3 builds are running on one agent so it whill take up to 80 hours and
> even may fail because of outofmemory. How to configure my agents to run
> them
> as equal? Is there some modifications in version 3.4 with agents?
>
> It would be grate feature if anthill will calculate average build time to
> get its "weight" and use it when choosing for agent.
>
> I`m using version 3.3.2
>
> Uldis Karlovs-Karlovskis, C. T. Co
> uldis.karlovs-karlovskis at ctco.lv
>
>
> _______________________________________________
> Anthill-pro mailing list
> Anthill-pro at lists.urbancode.com
> http://lists.urbancode.com/mailman/listinfo/anthill-pro
>
>
> _______________________________________________
> Anthill-pro mailing list
> Anthill-pro at lists.urbancode.com
> http://lists.urbancode.com/mailman/listinfo/anthill-pro
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.urbancode.com/pipermail/anthill-pro/attachments/20071128/3ff102cc/attachment-0001.htm