[Anthill-pro] Stamps & Properties

[Yanko, Curtis]

That's very interesting. Do you apply that as a lable or defer the
labeling.
 
Lets say I don't apply a build label (I'm using SVN) how can I apply one
after the fact? Do I need the SVN revision number?
 
===
-Curt
W: 860.702.9059
M: 860.881.2050
 

________________________________

From: anthill-pro-bounces at lists.urbancode.com
[mailto:anthill-pro-bounces at lists.urbancode.com] On Behalf Of Eric
Minick
Sent: Friday, January 11, 2008 10:40 AM
To: AnthillPro user and support list.
Subject: Re: [Anthill-pro] Stamps & Properties


We just have two stamps really. We have a dev stamp that gives a number
like DEV-3200 and then a release stamp where we pull a market friendly
number out of thin air and apply it to an existing release candidate.

-- Eric 


On 1/11/08, Yanko, Curtis <curt_yanko at uhc.com> wrote: 

	Besides, what's the point of having Build life sand then giving
it lots
	of different Stamps? What do you guys do?
	
	
	===
	-Curt
	W: 860.702.9059
	M: 860.881.2050
	
	-----Original Message-----
	From: anthill-pro-bounces at lists.urbancode.com
	[mailto:anthill-pro-bounces at lists.urbancode.com] On Behalf Of
Eric 
	Minick
	Sent: Thursday, January 10, 2008 6:13 PM
	To: AnthillPro user and support list.
	Subject: Re: [Anthill-pro] Stamps & Properties
	
	Curtis,
	
	Build:
	1.0.0.${+property:value}
	Dev:
	DEV-${bsh: StampLookup.getLatestStampValueForStyle("BLD")}
	QA:
	QA-${bsh:StampLookup.getLatestStampValueForStyle("BLD")}
	
	Does the perpending of BLD/Dev/QA to the build number actually
buy you a
	whole lot though when the status is already there? Is there a
lack on 
	Anthill's part of making a build's status obvious enough?
	
	-- Eric
	
	
	Yanko, Curtis wrote:
	> All,
	>
	> I am trying to figure out a strategy for my stamping. My
intent is to
	> generate stamps that are used as labels and represent the
promotion 
	> level. So I have something like this:
	>
	> BLD-Major.minior.bug.build
	> DEV-Major.minor.bug.build
	>
	> So I set up in my stamping strategy something like this
	>
	> Build BLD-1.1.0.${+property:BuildNum} 
	> Dev DEV-1.1.0.${property:BuildNum}  <----- Notice no increment
	>
	> but the problem is I'm still referencig my BuildNum which amy
have
	> changed. So I'm considering dropping the BLD or DEV and just 
	> pre-pending at Label time or figuring out how to save BuildNum
for a
	> particular buildlife and use that.
	>
	> Thoughts?
	>
	> I'dalso be interested in hearing about other strategies people
have 
	> come up with.
	>
	> ===
	> -Curt
	> W: 860.702.9059
	> M: 860.881.2050
	>
	>
	> This e-mail, including attachments, may include confidential
and/or
	> proprietary information, and may be used only by the person or
entity 
	> to which it is addressed. If the reader of this e-mail is not
the
	> intended recipient or his or her authorized agent, the reader
is
	> hereby notified that any dissemination, distribution or
copying of 
	> this e-mail is prohibited. If you have received this e-mail in
error,
	> please notify the sender by replying to this message and
delete this
	e-mail immediately.
	>
---------------------------------------------------------------------- 
	> --
	>
	> _______________________________________________
	> Anthill-pro mailing list
	> Anthill-pro at lists.urbancode.com
	> http://lists.urbancode.com/mailman/listinfo/anthill-pro
	>
	_______________________________________________
	Anthill-pro mailing list
	Anthill-pro at lists.urbancode.com 
	http://lists.urbancode.com/mailman/listinfo/anthill-pro
	
	
	This e-mail, including attachments, may include confidential
and/or
	proprietary information, and may be used only by the person or
entity to 
	which it is addressed. If the reader of this e-mail is not the
intended
	recipient or his or her authorized agent, the reader is hereby
notified
	that any dissemination, distribution or copying of this e-mail
is
	prohibited. If you have received this e-mail in error, please
notify the
	sender by replying to this message and delete this e-mail
immediately.
	
	_______________________________________________
	Anthill-pro mailing list 
	Anthill-pro at lists.urbancode.com
	http://lists.urbancode.com/mailman/listinfo/anthill-pro
	




This e-mail, including attachments, may include confidential and/or 
proprietary information, and may be used only by the person or entity to 
which it is addressed. If the reader of this e-mail is not the intended 
recipient or his or her authorized agent, the reader is hereby notified 
that any dissemination, distribution or copying of this e-mail is 
prohibited. If you have received this e-mail in error, please notify the 
sender by replying to this message and delete this e-mail immediately.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.urbancode.com/pipermail/anthill-pro/attachments/20080111/344395e3/attachment.htm