[Anthill-pro] Recipient
generator'CommittingDevelopers'delieversempty list.
Steve Boone
sbb at urbancode.com
Tue Mar 25 09:18:30 CST 2008
Ronald,
I am unable to reproduce this error, and I believe there were some
notification issues that were fixed after 3.4.10.
Can you try upgrading to 3.4.12, and let me know the User Generator script
starts to pull some results for you.
Cheers,
Steve Boone
On Tue, Mar 25, 2008 at 5:03 AM, Ronald Barrett <ronald.barrett at venyon.com>
wrote:
> I tried sending an email containing some bitmaps of the dashboard.
>
> Depending on where I look in the dashboard it shows something different.
>
> Under Most Recent Status Assignments: I see the latest successfull build
> as 'sucess' (Green).
> Under Recent Activity I see the latest successful build as 'Complete'
> (Green).
>
> Failed builds don't show up under Most Recent Status Assignments at all
> (red).
> Under Recent Activity I see them as 'failed' (red)
>
> In the Status History using -- Any Status --- I only see succesfull
> builds, although there have been failed builds.
>
>
> I am not sure if this makes any difference in the reason for this thread.
> I am still not able to get the Commiting Developers Recipient Generator to
> generate an email.
> I noticed in the doumentation that there was something mentioned about an
> User-Repository Alias being used. Presently we are using the same name for
> AnthillPro users as for the subversion users and there is no alias set in
> AnthillPro. The only other thing I can think of is we are using an 'ssh'
> connection to subversion for each developer but anthillpro uses https to
> connect.
>
> Regards,
>
> Ron Barrett
>
>
> ------------------------------
> *From:* anthill-pro-bounces at lists.urbancode.com [mailto:
> anthill-pro-bounces at lists.urbancode.com] *On Behalf Of *Steve Boone
> *Sent:* Dienstag, 18. März 2008 15:35
>
> *To:* AnthillPro user and support list.
> *Subject:* Re: [Anthill-pro] Recipient
> generator'CommittingDevelopers'delieversempty list.
>
> Ronald,
>
> are you seeing builds getting correctly marked successful or failure?
>
>
>
> On 3/11/08, Ronald Barrett <ronald.barrett at venyon.com> wrote:
> >
> > Hi Steve,
> >
> > I have configured the Lifecycle as you commented and re-added it to the
> > job. This job is in the job library, if that makes any difference. I am
> > attaching a bitmap with the 'Most Resent Status Assignments' and the 'Recent
> > Activity' tables. I can only see the match of the 'success' status in the
> > Status Assignments to the complete in the Recent Acitvities. I tried adding
> > a few Statuses to see if that would make any difference but it hasn't
> > changed.
> >
> > The only other thing I can think of is the scripts used to set the
> > status at the end of the build. This is what we are using to set a failure.
> >
> >
> > *return* Fail.unless(
> > Logic.and(
> > Logic.not(
> > Logic.or(
> > Output.contains("BUILD FAILURE"),
> > Output.contains("BUILD ERROR")
> >
> >
> > )
> > ),
> > ExitCode.is(0)
> > )
> > )
> >
> >
> >
> > Regards,
> >
> >
> >
> > Ron
> >
> >
> >
> >
> >
> > ------------------------------
> > *From:* anthill-pro-bounces at lists.urbancode.com [mailto:
> > anthill-pro-bounces at lists.urbancode.com] *On Behalf Of *Steve Boone
> > *Sent:* Montag, 10. März 2008 20:42
> > *To:* AnthillPro user and support list.
> > *Subject:* Re: [Anthill-pro] Recipient generator
> > 'CommittingDevelopers'delieversempty list.
> >
> > Ronald,
> >
> > Did you change your changelog step, to use the "success" status? If you
> > chose failure, then it will look back to the last failed build, and only
> > look for changes from there.
> >
> > You should have
> >
> > -Added the lifecycle model to the job.
> > -Selected "Success" for your Change Log Start Status.
> >
> > Maybe I misunderstood? Are you saying you have it configured this way
> > and it is still erroring?
> >
> > On 3/10/08, Ronald Barrett <ronald.barrett at venyon.com> wrote:
> > >
> > > Hi Eric,
> > >
> > > The life cycle had the stati success, failue, and archived. I addded
> > > the lifecycle to the job ( in the job library ) and am still getting this in
> > > the changelog setp:
> > >
> > >
> > > change-log-summary: com.urbancode.vcsdriver3.ChangeLogSummary {
> > > changeSetCount: 0
> > > changeCount: 0
> > > latestChangeSetUser: null
> > > latestChangeSetDate: 1970-01-01 01:00:00 +0100
> > > }
> > >
> > >
> > > If I change the 'change log start status' to 'failure' I get a message
> > > in the log to the effect that the change log step was skipped as this is the
> > > first build.
> > >
> > >
> > > Regards,
> > >
> > > Ron
> > >
> > >
> > >
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: anthill-pro-bounces at lists.urbancode.com [mailto:
> > > anthill-pro-bounces at lists.urbancode.com] On Behalf Of Eric Minick
> > > Sent: Montag, 10. März 2008 17:45
> > > To: AnthillPro user and support list.
> > > Subject: Re: [Anthill-pro] Recipient generator 'Committing
> > > Developers'delieversempty list.
> > >
> > > Ron,
> > >
> > > It sounds like you might be missing statuses in your life cycle. Could
> > > you check to see if the lifecycle you have selected has any statuses in it?
> > > If it does, I would drop the existing changelog step and re-add it.
> > >
> > > If you are missing the statuses, you would need to add some (like
> > > "successful" for successful builds) and add an assign status step at the end
> > > of your builds that assigns the status of the build to successful if
> > > everything has passed.
> > >
> > > Regards,
> > >
> > > Eric
> > >
> > > Ronald Barrett wrote:
> > > > The Get changelog start status is set to 'Make Selection', as there
> > > is
> > > > no other selection to make and the Quiet period is set to 'Change
> > > Log
> > > > Quiet Period'
> > > >
> > > > Ron Barrett
> > > >
> > > >
> > > ----------------------------------------------------------------------
> > > > --
> > > > *From:* anthill-pro-bounces at lists.urbancode.com
> > > > [mailto:anthill-pro-bounces at lists.urbancode.com] *On Behalf Of
> > > *Steve
> > > > Boone
> > > > *Sent:* Montag, 10. März 2008 17:13
> > > > *To:* AnthillPro user and support list.
> > > > *Subject:* Re: [Anthill-pro] Recipient generator 'Committing
> > > > Developers'delievers empty list.
> > > >
> > > > Ronald,
> > > >
> > > > On your get changelong step, there is a "Get changelog start status"
> > > ,
> > > > what do you have that set too?
> > > >
> > > > Also, how do you have your Quiet Period configured on the project?
> > > >
> > > > Regards,
> > > > Steve Boone
> > > >
> > > > On 3/10/08, *Ronald Barrett* <ronald.barrett at venyon.com
> > > > <mailto:ronald.barrett at venyon.com>> wrote:
> > > >
> > > > Hi,
> > > >
> > > > I am working on setting up notifications and am unable to get
> > > the
> > > > Committing Developers Recipient generator to deliever a list of
> > > > commiting developers.
> > > >
> > > > I am not sure if I missed something in the documentation or what
> > > > but I can't get this to work. I would like to use this for
> > > > notifying our Developers of new builds and there status but
> > > don't
> > > > want to spam everyone.
> > > >
> > > > I updated the script to use the
> > > > UserLookup.getAllContributors(workflow) as the
> > > > UserLookkup.getAllContributers has been depricated.
> > > >
> > > > We are using AnthillPro 3.4.10 and our repository is Subversion.
> > > > I have noticed that my Change Log step generally delivers the
> > > > following results.
> > > >
> > > > change-log-summary: com.urbancode.vcsdriver3.ChangeLogSummary {
> > > > changeSetCount: 0
> > > > changeCount: 0
> > > > latestChangeSetUser: null
> > > > latestChangeSetDate: 1970-01-01 01:00:00 +0100
> > > > }
> > > >
> > > > If use same command that is run by AnthillPro on the command
> > > line
> > > > I get the following:
> > > >
> > > > svn log ...
> > > >
> > > >
> > > ----------------------------------------------------------------------
> > > > --
> > > >
> > > >
> > > > If I run the svn info command I get something like this:
> > > >
> > > > Revision: 1234
> > > > Node Kind: directory
> > > > Last Changed Author: <username>
> > > > Last Changed Rev: 3456
> > > > Last Changed Date: 2008-03-10 10:26:52 +0100 (Mo, 10 Mrz 2008)
> > > >
> > > >
> > > >
> > > > Have I missed something?
> > > >
> > > >
> > > > Ronald Barrett
> > > > Senior Software Engineer
> > > >
> > > >
> > > >
> > > > VENYON GmbH
> > > >
> > > >
> > > >
> > > > Email: ronald.barrett at venyon.de <mailto:ronald.barrett at venyon.de
> > > >
> > > > Willy-Brandt-Platz 2 Phone +49 89 45 21 33 102
> > > > 81829 Muenchen Fax +49 89 45 21 33 100
> > > > Germany
> > > >
> > > >
> > > >
> > > > Geschäftsführer: Oliver Pannke - Sitz der Gesellschaft: München
> > > -
> > > > HRB 163208
> > > > (Amtsgericht München)
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Anthill-pro mailing list
> > > > Anthill-pro at lists.urbancode.com
> > > > <mailto:Anthill-pro at lists.urbancode.com>
> > > > http://lists.urbancode.com/mailman/listinfo/anthill-pro
> > > >
> > > >
> > > >
> > > ----------------------------------------------------------------------
> > > > --
> > > >
> > > > _______________________________________________
> > > > Anthill-pro mailing list
> > > > Anthill-pro at lists.urbancode.com
> > > > http://lists.urbancode.com/mailman/listinfo/anthill-pro
> > > >
> > > _______________________________________________
> > > Anthill-pro mailing list
> > > Anthill-pro at lists.urbancode.com
> > > http://lists.urbancode.com/mailman/listinfo/anthill-pro
> > > _______________________________________________
> > > Anthill-pro mailing list
> > > Anthill-pro at lists.urbancode.com
> > > http://lists.urbancode.com/mailman/listinfo/anthill-pro
> > >
> >
> >
> > _______________________________________________
> > Anthill-pro mailing list
> > Anthill-pro at lists.urbancode.com
> > http://lists.urbancode.com/mailman/listinfo/anthill-pro
> >
> >
>
> _______________________________________________
> Anthill-pro mailing list
> Anthill-pro at lists.urbancode.com
> http://lists.urbancode.com/mailman/listinfo/anthill-pro
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.urbancode.com/pipermail/anthill-pro/attachments/20080325/30d770b9/attachment-0001.htm
More information about the Anthill-pro
mailing list