[Anthill-pro] "Enable Refresh" doesn't stick in 3.7.1

Mon Nov 16 18:21:15 CST 2009

Eric, which issue are you referring to?  The focus of this thread is
starting to fray a bit...
-chris

This e-mail and any attachments may contain information that is confidential and proprietary and otherwise protected from disclosure. If you are not the intended recipient of this e-mail, do not read, duplicate or redistribute it by any means. Please immediately delete it and any attachments and notify the sender that you have received it in error. Unintended recipients are prohibited from taking action on the basis of information in this e-mail or any attachments. The DRW Companies make no representations that this e-mail or any attachments are free of computer viruses or other defects. -----Original Message-----

From: anthill-pro-bounces at lists.urbancode.com
[mailto:anthill-pro-bounces at lists.urbancode.com] On Behalf Of Eric
Minick
Sent: Monday, November 16, 2009 6:16 PM
To: AnthillPro user and support list.
Subject: Re: [Anthill-pro] "Enable Refresh" doesn't stick in 3.7.1

This is more likely to be an issue where working directories are
conflicting. Are all the jobs set to run in the same directory? If
they're
part of the same workflow you want to edit the workflow definition, edit
each job's configuration and switch the lock type from job to workflow.

- Eric

On Mon, Nov 16, 2009 at 4:21 PM, Peter Steele <psteele at maxiscale.com>
wrote:

> Another problem I have discovered today is that even though I have my
build
> agents defined to run 5 jobs at a time, they seem to only be running a
> single job. Is this a known issue?
>
> -----Original Message-----
> From: anthill-pro-bounces at lists.urbancode.com [mailto:
> anthill-pro-bounces at lists.urbancode.com] On Behalf Of Chris Walquist
> Sent: Monday, November 16, 2009 12:20 PM
> To: AnthillPro user and support list.
> Subject: RE: [Anthill-pro] "Enable Refresh" doesn't stick in 3.7.1
>
> We ran into persistence exceptions for buildlives that had had archive
> workflows run on them.  Had to go into the DB and delete the offending
> objects directly in order to work around it.
>
> -chris
>
>
>
>
> This e-mail and any attachments may contain information that is
> confidential and proprietary and otherwise protected from disclosure.
If you
> are not the intended recipient of this e-mail, do not read, duplicate
or
> redistribute it by any means. Please immediately delete it and any
> attachments and notify the sender that you have received it in error.
> Unintended recipients are prohibited from taking action on the basis
of
> information in this e-mail or any attachments. The DRW Companies make
no
> representations that this e-mail or any attachments are free of
computer
> viruses or other defects. -----Original Message-----
>
>
> From: anthill-pro-bounces at lists.urbancode.com
> [mailto:anthill-pro-bounces at lists.urbancode.com] On Behalf Of Mark
Melvin
> Sent: Monday, November 16, 2009 11:59 AM
> To: AnthillPro user and support list.
> Subject: RE: [Anthill-pro] "Enable Refresh" doesn't stick in 3.7.1
>
> I am on 3.7.1 and Urbancode provided me with a patch to fix the
'unable to
> delete build lives' issue.  I imagine this will be in the next
official
> 3.7.x release.
>
> M.
>
> -----Original Message-----
> From: anthill-pro-bounces at lists.urbancode.com
> [mailto:anthill-pro-bounces at lists.urbancode.com] On Behalf Of Peter
Steele
> Sent: Monday, November 16, 2009 12:56 PM
> To: AnthillPro user and support list.
> Cc: anthill-pro-bounces at lists.urbancode.com
> Subject: RE: [Anthill-pro] "Enable Refresh" doesn't stick in 3.7.1
>
> We upgraded from 3.5.2 to 3.7.1, skipping 3.6. I wonder it that has
caused
> this issue. I guess I'll open a ticket on supportal to make sure this
gets
> handled.
>
> -----Original Message-----
> From: anthill-pro-bounces at lists.urbancode.com
> [mailto:anthill-pro-bounces at lists.urbancode.com] On Behalf Of
> Gurinder.Randhawa at tu-group.com
> Sent: Monday, November 16, 2009 9:54 AM
> To: AnthillPro user and support list.
> Cc: anthill-pro at lists.urbancode.com;
> anthill-pro-bounces at lists.urbancode.com
> Subject: Re: [Anthill-pro] "Enable Refresh" doesn't stick in 3.7.1
>
> I was told from AHP Support #2 below  was resolved in v3.7.1.
>
> Luckily we haven't upgraded from 3.6.2 as this is the major issue we
have
> in our current version. Specifically we are not able to delete old
build
> lives, we get the same "PersistenceException". This all started from
our
> previous upgrade of 3.5.x -> 3.6.x but it doesn't look like its fixed
in
> 3.7.x version either.
>
> --Gurinder
>
>
>
> From:
> Peter Steele <psteele at maxiscale.com>
> To:
> "anthill-pro at lists.urbancode.com" <anthill-pro at lists.urbancode.com>
> Date:
> 15/11/2009 02:21 PM
> Subject:
> [Anthill-pro] "Enable Refresh" doesn't stick in 3.7.1
>
>
>
> We've upgraded to 3.7.1 for the most part everything is working well.
> However, a few things are misbehaving.
>
>
> 1.       When I click on Enable Refresh while a build is running,
after
> the 30 second count down is reach auto-refresh is turned off.
>
> 2.       We seem to be having problems removing old builds. We're
> getting
> errors like "PersistenceException: Error removing build life: 19148
object
> in database".
>
> 3.       On several occasions I've made changes to a Shell build step
> and
> clicked Save, but instead of saving it simply closes the window and
takes
> me back to the Administration page.
>
> 4.       I am unable to remove Environments, even if they are not used
> anywhere. I get the exception: "PersistenceException: Error removing
> ServerGroup object in database".
>
> 5.       In 3.5.2, if I have the folders in the Administration page
> expanded they would stay expanded as I did my various editing tasks.
In
> 3.7.1, all folders will suddenly close after certain operations and I
have
> to go through and expand the ones I'm working on again.
>
> Are these known problems? Are there fixes for any of them? Number 2
above
> particularly troublesome since I am unable to remove failed builds I
no
> longer want.
>
> _______________________________________________
> Anthill-pro mailing list
> Anthill-pro at lists.urbancode.com
> http://lists.urbancode.com/mailman/listinfo/anthill-pro
>
>
> _______________________________________________
> Anthill-pro mailing list
> Anthill-pro at lists.urbancode.com
> http://lists.urbancode.com/mailman/listinfo/anthill-pro
> _______________________________________________
> Anthill-pro mailing list
> Anthill-pro at lists.urbancode.com
> http://lists.urbancode.com/mailman/listinfo/anthill-pro
> _______________________________________________
> Anthill-pro mailing list
> Anthill-pro at lists.urbancode.com
> http://lists.urbancode.com/mailman/listinfo/anthill-pro
> _______________________________________________
> Anthill-pro mailing list
> Anthill-pro at lists.urbancode.com
> http://lists.urbancode.com/mailman/listinfo/anthill-pro
>
> _______________________________________________
> Anthill-pro mailing list
> Anthill-pro at lists.urbancode.com
> http://lists.urbancode.com/mailman/listinfo/anthill-pro
>
>
_______________________________________________
Anthill-pro mailing list
Anthill-pro at lists.urbancode.com
http://lists.urbancode.com/mailman/listinfo/anthill-pro