[Anthill-pro] "Enable Refresh" doesn't stick in 3.7.1

[Eric Minick]

I was referring to only 1 job happening at a time.

On Mon, Nov 16, 2009 at 5:21 PM, Chris Walquist
<cwalquist at drwholdings.com>wrote:

> Eric, which issue are you referring to?  The focus of this thread is
> starting to fray a bit...
> -chris
>
>
>
> This e-mail and any attachments may contain information that is
> confidential and proprietary and otherwise protected from disclosure. If you
> are not the intended recipient of this e-mail, do not read, duplicate or
> redistribute it by any means. Please immediately delete it and any
> attachments and notify the sender that you have received it in error.
> Unintended recipients are prohibited from taking action on the basis of
> information in this e-mail or any attachments. The DRW Companies make no
> representations that this e-mail or any attachments are free of computer
> viruses or other defects. -----Original Message-----
>
>
> From: anthill-pro-bounces at lists.urbancode.com
> [mailto:anthill-pro-bounces at lists.urbancode.com] On Behalf Of Eric
> Minick
> Sent: Monday, November 16, 2009 6:16 PM
> To: AnthillPro user and support list.
> Subject: Re: [Anthill-pro] "Enable Refresh" doesn't stick in 3.7.1
>
> This is more likely to be an issue where working directories are
> conflicting. Are all the jobs set to run in the same directory? If
> they're
> part of the same workflow you want to edit the workflow definition, edit
> each job's configuration and switch the lock type from job to workflow.
>
> - Eric
>
> On Mon, Nov 16, 2009 at 4:21 PM, Peter Steele <psteele at maxiscale.com>
> wrote:
>
> > Another problem I have discovered today is that even though I have my
> build
> > agents defined to run 5 jobs at a time, they seem to only be running a
> > single job. Is this a known issue?
> >
> > -----Original Message-----
> > From: anthill-pro-bounces at lists.urbancode.com [mailto:
> > anthill-pro-bounces at lists.urbancode.com] On Behalf Of Chris Walquist
> > Sent: Monday, November 16, 2009 12:20 PM
> > To: AnthillPro user and support list.
> > Subject: RE: [Anthill-pro] "Enable Refresh" doesn't stick in 3.7.1
> >
> > We ran into persistence exceptions for buildlives that had had archive
> > workflows run on them.  Had to go into the DB and delete the offending
> > objects directly in order to work around it.
> >
> > -chris
> >
> >
> >
> >
> > This e-mail and any attachments may contain information that is
> > confidential and proprietary and otherwise protected from disclosure.
> If you
> > are not the intended recipient of this e-mail, do not read, duplicate
> or
> > redistribute it by any means. Please immediately delete it and any
> > attachments and notify the sender that you have received it in error.
> > Unintended recipients are prohibited from taking action on the basis
> of
> > information in this e-mail or any attachments. The DRW Companies make
> no
> > representations that this e-mail or any attachments are free of
> computer
> > viruses or other defects. -----Original Message-----
> >
> >
> > From: anthill-pro-bounces at lists.urbancode.com
> > [mailto:anthill-pro-bounces at lists.urbancode.com] On Behalf Of Mark
> Melvin
> > Sent: Monday, November 16, 2009 11:59 AM
> > To: AnthillPro user and support list.
> > Subject: RE: [Anthill-pro] "Enable Refresh" doesn't stick in 3.7.1
> >
> > I am on 3.7.1 and Urbancode provided me with a patch to fix the
> 'unable to
> > delete build lives' issue.  I imagine this will be in the next
> official
> > 3.7.x release.
> >
> > M.
> >
> > -----Original Message-----
> > From: anthill-pro-bounces at lists.urbancode.com
> > [mailto:anthill-pro-bounces at lists.urbancode.com] On Behalf Of Peter
> Steele
> > Sent: Monday, November 16, 2009 12:56 PM
> > To: AnthillPro user and support list.
> > Cc: anthill-pro-bounces at lists.urbancode.com
> > Subject: RE: [Anthill-pro] "Enable Refresh" doesn't stick in 3.7.1
> >
> > We upgraded from 3.5.2 to 3.7.1, skipping 3.6. I wonder it that has
> caused
> > this issue. I guess I'll open a ticket on supportal to make sure this
> gets
> > handled.
> >
> > -----Original Message-----
> > From: anthill-pro-bounces at lists.urbancode.com
> > [mailto:anthill-pro-bounces at lists.urbancode.com] On Behalf Of
> > Gurinder.Randhawa at tu-group.com
> > Sent: Monday, November 16, 2009 9:54 AM
> > To: AnthillPro user and support list.
> > Cc: anthill-pro at lists.urbancode.com;
> > anthill-pro-bounces at lists.urbancode.com
> > Subject: Re: [Anthill-pro] "Enable Refresh" doesn't stick in 3.7.1
> >
> > I was told from AHP Support #2 below  was resolved in v3.7.1.
> >
> > Luckily we haven't upgraded from 3.6.2 as this is the major issue we
> have
> > in our current version. Specifically we are not able to delete old
> build
> > lives, we get the same "PersistenceException". This all started from
> our
> > previous upgrade of 3.5.x -> 3.6.x but it doesn't look like its fixed
> in
> > 3.7.x version either.
> >
> > --Gurinder
> >
> >
> >
> > From:
> > Peter Steele <psteele at maxiscale.com>
> > To:
> > "anthill-pro at lists.urbancode.com" <anthill-pro at lists.urbancode.com>
> > Date:
> > 15/11/2009 02:21 PM
> > Subject:
> > [Anthill-pro] "Enable Refresh" doesn't stick in 3.7.1
> >
> >
> >
> > We've upgraded to 3.7.1 for the most part everything is working well.
> > However, a few things are misbehaving.
> >
> >
> > 1.       When I click on Enable Refresh while a build is running,
> after
> > the 30 second count down is reach auto-refresh is turned off.
> >
> > 2.       We seem to be having problems removing old builds. We're
> > getting
> > errors like "PersistenceException: Error removing build life: 19148
> object
> > in database".
> >
> > 3.       On several occasions I've made changes to a Shell build step
> > and
> > clicked Save, but instead of saving it simply closes the window and
> takes
> > me back to the Administration page.
> >
> > 4.       I am unable to remove Environments, even if they are not used
> > anywhere. I get the exception: "PersistenceException: Error removing
> > ServerGroup object in database".
> >
> > 5.       In 3.5.2, if I have the folders in the Administration page
> > expanded they would stay expanded as I did my various editing tasks.
> In
> > 3.7.1, all folders will suddenly close after certain operations and I
> have
> > to go through and expand the ones I'm working on again.
> >
> > Are these known problems? Are there fixes for any of them? Number 2
> above
> > particularly troublesome since I am unable to remove failed builds I
> no
> > longer want.
> >
> > _______________________________________________
> > Anthill-pro mailing list
> > Anthill-pro at lists.urbancode.com
> > http://lists.urbancode.com/mailman/listinfo/anthill-pro
> >
> >
> > _______________________________________________
> > Anthill-pro mailing list
> > Anthill-pro at lists.urbancode.com
> > http://lists.urbancode.com/mailman/listinfo/anthill-pro
> > _______________________________________________
> > Anthill-pro mailing list
> > Anthill-pro at lists.urbancode.com
> > http://lists.urbancode.com/mailman/listinfo/anthill-pro
> > _______________________________________________
> > Anthill-pro mailing list
> > Anthill-pro at lists.urbancode.com
> > http://lists.urbancode.com/mailman/listinfo/anthill-pro
> > _______________________________________________
> > Anthill-pro mailing list
> > Anthill-pro at lists.urbancode.com
> > http://lists.urbancode.com/mailman/listinfo/anthill-pro
> >
> > _______________________________________________
> > Anthill-pro mailing list
> > Anthill-pro at lists.urbancode.com
> > http://lists.urbancode.com/mailman/listinfo/anthill-pro
> >
> >
> _______________________________________________
> Anthill-pro mailing list
> Anthill-pro at lists.urbancode.com
> http://lists.urbancode.com/mailman/listinfo/anthill-pro
> _______________________________________________
> Anthill-pro mailing list
> Anthill-pro at lists.urbancode.com
> http://lists.urbancode.com/mailman/listinfo/anthill-pro
>