[Anthill] never-ending project

[anthill at nillis.com]

Are you using CVS?

I actually brought up a similar issue a couple of days ago.  It seems that
the problem is around the point where anthill is doing a "cvs log" and
parsing the results in order to either determine if a build is necessary or
to generate the revision log (your case seems to be the latter)  It's likely
that the CVS log command doesn't return or doesn't complete properly.

I am keeping an eye on our builds for the next time this happens. It's weird
how we used to get this every day and now, ever since I posted about it,
everything is running smoothly...

Chris

----- Original Message ----- 
From: "Joana Hois" <carlin80 at web.de>
To: <anthill at lists.urbancode.com>
Sent: Wednesday, June 16, 2004 4:45 PM
Subject: [Anthill] never-ending project


> Hi,
>
> we have been using Anthill for a year and it worked very well.
>
> Now, every time a build process is started, it won't finish. The
> buildlogfile shows all the results correctly and the build seems to be
> done ("BUILD SUCCESSFUL - Total time: 5 minutes 8 seconds" - manually
> starting the buildfile also succeeds) but the project is still in the
> build queue and the "current versioned-build" bar does not change.
>
> Do you have any suggestions? We would be glad about your hints and ideas.
>
> Best regards,
> Joana
> _______________________________________________
> Anthill mailing list
> Anthill at lists.urbancode.com
> http://lists.urbancode.com/mailman/listinfo/anthill
>