[Anthill] Checkout error with StarTeam

[Robert Smith]

Here's an error message from the versioned build, if it helps. A good log
would really go far here.

Anthill version 1.7.0.162

Retrieving project files: OK
OK
FAILED to run build script.  Message: Failed to Build project. Error: 1
Project Site: http://xxx.xxx.1.92/anthill/projects/ShipX/

Build Log:
http://xxx.xxx.1.92/anthill/projects/ShipX/buildLogs/ShipX-test-build.log
Tag: skipped

-------------------------------------
C:\anthill\publishDir\ShipX\buildLogs\ShipX-test-build.log

Thanks,

Robert

----- Original Message -----
From: "Eric Minick" <eric at urbancode.com>
To: "Anthill user list" <anthill at lists.urbancode.com>
Sent: Saturday, September 18, 2004 9:02 AM
Subject: Re: [Anthill] Checkout error with StarTeam


> Robert,
>
> Just to sanity check the switches, you might try running the same
> command yourself. If it works, then we'll go see what Anthill is doing
> differently. If it doesn't, a call to Borland might not be a bad idea.
> Alternatively, you may be able to remove the -x option (I'm not sure
> what the side effects are) by editing
> conf\profiles\Win32\win_starteam\getRevisionsSince.pgl or the matching
> Unix file. I believe you would also need to remove the corresponding
> files in the pagelets directory.
>
> Regards,
>
> Eric
>
> Robert Smith wrote:
>
> >OK, that did it. I just put StarTeam in my path (didn't need it there
> >before), and that problem is solved. But now, I'm getting another issue:
> >StarTeam seems to choke on this -x option. -x looks like a valid switch
(to
> >bypass the error messages), but it's still complaining about it. Does
> >Anthill send the switches in an unorthodox way?
> >
> >Full text:
> >
> >Anthill version 1.7.0.162
> >
> >Retrieving project files: FAILED to build project.  Message:
ProfileAdapter
> >checkout failed:
> >Invalid command line specification:
> >unknown option: -x
> >
> >
> >
> > Usage for StarTeam 4.2 check out file command:
> >
> >  stcmd co -?  : Show this usage message
> >
> >  stcmd co -p project [-pwdfile filename] [-cmp] [-encrypt [RC4, RC2_ECB,
> >RC2_CBC, RC2_CFB]] [-cfgl label | -cfgd date | -cfgp promotion state]
[-is]
> >[-filter filter] [-q] [-x] [-stop] [-rp directory] [-?] [-h] [-help]
> >[-nologo] [-l | -u | -nel] [-ro | -rw] [-vn number | -vd date | -vl
label]
> >[-f NCO] [-o | -i] [-ts] [-eol [on | off]] [-fs] [files...]
> >
> >
> >Thanks,
> >
> >Robert
> >
> >_______________________________________________
> >Anthill mailing list
> >Anthill at lists.urbancode.com
> >http://lists.urbancode.com/mailman/listinfo/anthill
> >
> >
> >
> >
> _______________________________________________
> Anthill mailing list
> Anthill at lists.urbancode.com
> http://lists.urbancode.com/mailman/listinfo/anthill