[Anthill] Checkout error with StarTeam

[Robert Smith]

OK, here's some more info for all the StarTeam users out there. The standard
port that the StarTeam server listens on is 49200, but that's only for the
RPC stuff going from the StarTeam client.  For command line/AntHill TCP/IP
communications, the port is 49201. Big difference. So, as far as the
checking out is concerned, everything is well. The error message I'm now
getting is:

Anthill version 1.7.0.162

Retrieving project files: OK
FAILED to build project.  Message: null

Huh? Any ideas?

Thanks,

Robert
----- Original Message -----
From: "Eric Minick" <eric at urbancode.com>
To: "Anthill user list" <anthill at lists.urbancode.com>
Sent: Saturday, September 18, 2004 9:02 AM
Subject: Re: [Anthill] Checkout error with StarTeam


> Robert,
>
> Just to sanity check the switches, you might try running the same
> command yourself. If it works, then we'll go see what Anthill is doing
> differently. If it doesn't, a call to Borland might not be a bad idea.
> Alternatively, you may be able to remove the -x option (I'm not sure
> what the side effects are) by editing
> conf\profiles\Win32\win_starteam\getRevisionsSince.pgl or the matching
> Unix file. I believe you would also need to remove the corresponding
> files in the pagelets directory.
>
> Regards,
>
> Eric
>
> Robert Smith wrote:
>
> >OK, that did it. I just put StarTeam in my path (didn't need it there
> >before), and that problem is solved. But now, I'm getting another issue:
> >StarTeam seems to choke on this -x option. -x looks like a valid switch
(to
> >bypass the error messages), but it's still complaining about it. Does
> >Anthill send the switches in an unorthodox way?
> >
> >Full text:
> >
> >Anthill version 1.7.0.162
> >
> >Retrieving project files: FAILED to build project.  Message:
ProfileAdapter
> >checkout failed:
> >Invalid command line specification:
> >unknown option: -x
> >
> >
> >
> > Usage for StarTeam 4.2 check out file command:
> >
> >  stcmd co -?  : Show this usage message
> >
> >  stcmd co -p project [-pwdfile filename] [-cmp] [-encrypt [RC4, RC2_ECB,
> >RC2_CBC, RC2_CFB]] [-cfgl label | -cfgd date | -cfgp promotion state]
[-is]
> >[-filter filter] [-q] [-x] [-stop] [-rp directory] [-?] [-h] [-help]
> >[-nologo] [-l | -u | -nel] [-ro | -rw] [-vn number | -vd date | -vl
label]
> >[-f NCO] [-o | -i] [-ts] [-eol [on | off]] [-fs] [files...]
> >
> >
> >Thanks,
> >
> >Robert
> >
> >_______________________________________________
> >Anthill mailing list
> >Anthill at lists.urbancode.com
> >http://lists.urbancode.com/mailman/listinfo/anthill
> >
> >
> >
> >
> _______________________________________________
> Anthill mailing list
> Anthill at lists.urbancode.com
> http://lists.urbancode.com/mailman/listinfo/anthill